Atenuador para ampli, PALMER PDI06 POWER ATTENUATOR

Atenuador para ampli, PALMER PDI06 POWER ATTENUATOR
El PALMER POWER ATTENUATOR es el increible Controlador de volumen para tu ampli que saca la Palmer
PDI06 power attenuator es ideal para directo o estudio. Si quieres tener el maximo rendimiento de tu ampli en
el entorno adecuado. necesitas esto.

Se conecta entre el ampli output y el altavoz. Y te permite funcionar con el volumen deseado desde un 100% a un 18%
tanto en directo como en estudio.

Puedes hacerlo funcionar como LOAD BOX absorbiendo la potencia de todo el ampli.  This mode of operation is useful, for example, when connecting an amplifier equipped with a speaker cabinet emulation directly to the mixing desk using an existing line-out and loud volume levels in the recording booth are undesirable. The unit has an input for the speaker signal from the amplifier and two outputs for connecting speaker cabinets.

The total impedance of the speakers must equal the value shown on the PDI06. For example: the outputs of a PDI06 that is specified for 8 ohms can be connected to one 8 ohm cabinet or two 16 ohm cabinets. The output of the (tube) amplifier is also set to 8 ohms.

SPECIFICATIONS

Maximum input power: 120 Watt
6-position switch, 5 increments (3 dB each) for volume reduction, equivalent to attenuation of the input power to 70%, 50%, 35%, 25%, 18%.
The LOAD BOX position mutes the connected speaker cabinet.
The BYPASS/ATTENUATOR switch lets the user toggle quickly between full and reduced output.
Input from amplifier: 1 x 6.3 mm jack socket
Output for speaker cabinets: 2 x 6.3 mm jack sockets connected in parallel
Output impedance: 8 Ohms und 16 Ohms versions available

musicasa | amplificadores palmerTenemos en Musicasa el Expositor Tone Center de Palmer. Si eres guitarrista y Quieres mejorar el sonido de tu amplificador…esta es la opción